Fence Contractor Blog

How to Build a Wood Privacy Fence DIY

Tue, 17 Jan 2023 20:30:42 GMT

How to build a wood privacy fence DIY in ten simple steps

1. Determine how much material you will require. Take a linear foot measurement around the perimeter of your backyard (or any area you wish to fence in). Then, once you've decided on the type of material you want to use, you can figure out how much of it you'll require. This do-it-yourself project includes the material prices and building method for a wooden fence of 150 linear feet in length.

2. Draw a rough outline and layout for the barrier. Mason's line or any sturdy thread that can be pulled taut can be used to mark the location of the fence. Use this string to assist you through the process of installing your fence posts and pickets.

3. Make sure the fence posts are evenly spaced. Using spray paint, mark a place on the ground every 6 to 8 feet along the line you just traced to indicate where the fence post holes will be. The distance between each post should be maintained throughout the whole article. A gate will almost certainly be required for your fence, so draw two parallel lines to indicate the location of the gate.

4. Dig post holes in the ground. Dig a hole on each spray-painted mark with a post hole digger (or a power auger if you have one, which will make the work a bit simpler if you do not). The depth and breadth of each hole are determined by the size of the fence posts you are using. Each hole should be three times the width of the post and a third the depth of the post's height (for example, an 8-foot post would require a hole that is 212 feet deep). Excavate a further 3 to 4 inches for the gravel base. Before digging any holes, contact 811 (the diggers' hotline) to verify that you do not disturb any underground utility lines.

5. Fill in each hole with gravel. Each hole will require a gravel base in order to aid in the drainage of water away from the posts. Fill each hole with 3 to 4 inches of gravel and pack it down firmly.

6. Prepare the concrete mix. Make sure you follow the manufacturer's recommendations when adding water to your concrete mix so that it becomes liquid and ready to pour. If you want the posts to set up as quickly as possible, use a fast-acting concrete.

7. Construct the fence posts out of concrete. Place a post in the center of each of the holes you just dug, one post per hole. As you pour concrete into the pit, have a companion hold the posts plumb or support them with stakes to keep them standing straight as you pour the concrete. After you've poured the concrete, you should slope it away from the post to allow for drainage. Backfill each hole with 1 to 2 inches of soil and pack it in securely on top of the concrete to prevent leakage. Before you can go to the following stage, the concrete must have had time to set, which might take several days.

Attach the horizontal rails at the eighth position. Attach horizontal rails between each post when the concrete has dried completely. Attach a horizontal rail to the posts at a distance of approximately 6 inches from the top and bottom of the posts, using a hammer or drill. For a fence that is 6 feet or taller (which is usually often the case for a privacy fence), you should additionally install a middle rail to provide additional stability and support. Check the rails using a level on a frequent basis to ensure that they remain straight.

9. Attach the pickets to the fence. Attach pickets to the rails with a hammer or drill, one on each side. If you want a real privacy fence, there should be no gaps between the pickets. Once again, use a level to ensure that all of the pickets are plumb as you work.

10. Protect the wood by coating it with a protective sealer. You must paint, stain , or otherwise coat your wooden privacy fence once it has been constructed in order to preserve it from the effects of the weather. Apply a fresh coat of paint to the fence every few years to keep it in good shape. If your privacy fence is made of a durable material such as vinyl or bamboo, you may skip this step.

Obviously we recommend using a professional fence contractor to build your next fence. But if you are good with your hands and have the time and expertise, there's no reason you can't take on the project yourself.

If you'd prefer we take on the job for you, contact us today.

How Much Does a Privacy Fence Cost?

Thu, 12 Jan 2023 20:30:42 GMT

Cost of a Privacy Fence

Most homeowners pay from $4,788 to $12,961 for a privacy fence. The national average price, which includes material and labor expenditures, is around $6,375.

Because most fence contractors charge by the linear foot for their work, it's helpful to know that the average pricing across different materials is around $45 per linear foot of fence installation. A number of variables can affect this pricing, and you could wind up spending anywhere from $44 to $66 per linear foot depending on your circumstances.

When it comes to privacy fence, how much does it cost?

Solid privacy fences can keep your garden safe from prying eyes and excessive noise, and they don't have to be prohibitively expensive to be effective. Here is a breakdown of the costs that may be associated with your privacy fence project:

The average cost across the country is $6,375.
The typical price range is $4,788 to $12,961 dollars.
$3,400 is the very bottom of the barrel.
$18,250 is the very top of the range.

Most homeowners in the United States may anticipate to pay between $4,788 and $12,961 for professional installation of a conventional 6-foot privacy fence around a regular-sized residential backyard in the average neighborhood. The precise cost of your project is determined by factors such as the size of your property, the fence material used, and the layout of your land.

An really big yard, high-end materials such as exotic woods and vinyl, or an unusually difficult job may push the price up to as much as $18,250.

A homeowner who wants to save money by using low-cost materials (such as bamboo panels) and a basic fence design, on the other hand, may pay as little as $3,400 for their fence.

Cost Estimator based on the size of the project

The majority of professional fence installers will price your project depending on the number of linear feet of privacy fencing you require for your yard or property. The size of your fence, therefore, is likely to have the greatest impact on its cost.

Price varies depending on the type of material used, the height of the fence and the design of the fence, but you can expect to pay around $45 per linear foot for a privacy fence (in contrast to a picket fence, split-rail fence, or decorative fence that does not give as much covering).

The most affordable privacy fences cost around $44 per linear foot, while the most costly fences cost approximately $66 per linear foot.

You can figure up an approximate estimate of how much a fence for your yard size would cost based on the average price of $45 per linear foot. According to this figure, a privacy fence for a small backyard of 200 linear feet would cost around $9,000 in total.

At the same rate, a typical backyard of 300 linear feet would cost around $13,500.

If you have a bigger backyard, around 500 linear feet in length, you should budget approximately $22,500 for your privacy fence.

Privacy fences are usually always seen in the backyard, for obvious reasons. Because they obstruct vistas, they are not commonly found in front yards. A privacy fence in the front yard may be prohibited in certain localities and many homeowners organizations.

The Influence of Other Factors on the Cost

Size is not the only quantity that can be quantified and computed with ease. The material you pick for your privacy fence, the position of your privacy fence in your yard, the neighborhood in which you reside, and other factors can all have a significant impact on the overall cost of your project.

Incorporating considerations such as these into your budgeting process for your ideal privacy fence makes the process a bit more difficult, but it results in a lot more accurate project estimate in the long run, as well.

Material for erecting a fence

It is not enough to have any fence if you want to maintain your privacy. If you have a chain-link fence, for example, your backyard will be visible to everyone passing by (unless you install additional privacy slats). Aluminum fencing, decorative wrought iron fencing, and conventional picket fences are all examples of fences that are both attractive and functional.

For a real privacy fence, you'll want to use a durable material. You'll find bamboo fencing to be the most cheap alternative. It comes in solid rolls or panels and costs from $12 to $23 per linear foot, depending on the style.

Various varieties of wood also make excellent privacy fences, and many of them are reasonably priced at between $12 and $30 each linear foot of fence.

Vinyl is arguably the most private of all the common fence materials since it comes in solid, sturdy panels with no gaps, making it the greatest choice for privacy. Vinyl fence, on the other hand, is a more expensive choice, costing between $22 and $38 per linear foot.

Fence H eight

Height: Standard privacy fences are typically 6 feet tall. An 8-foot privacy fence, on the other hand, is also a possibility in some areas. Check with your local construction rules and homeowner's association restrictions to see if an 8-foot fence is permitted in your community.

If you decide to go with a taller structure, it will cost you more money. Plan on spending an additional 25 percent to 35 percent of your budget to cover the additional material.

In the majority of situations, a fence is rendered inoperable without a gate. You'll want to take this in mind when putting up your budget because gates are more expensive to install than normal fence panels are. Costly gate installation is a result of the more hardware required as well as additional labor required to complete the job.

Your overall expenses might be increased by anywhere from $175 to $1,200 if you install a privacy fence gate, depending on its height and ornamental features. That is the price per gate for your privacy fence; thus, if you want more than one gate, double the price by two or three.

The land's incline.

The levelness of the ground surrounding your fence, rather than just the fence itself, might have an impact on the pricing.

The contractor may need to grade the soil before they can begin installing anything in your backyard if it has an inclination to it. The precise cost of land grading may vary depending on the geography of your property, but you can expect it to add anywhere from $100 to $3,400 to the overall cost of your fence installation.

Permits

The location of your home determines whether or not you need a permission to construct a privacy fence on your property. If you hire a contractor, he or she will most likely take care of all of the essential permissions, and all you will have to do is pay.

Even if you are hiring a professional to install your privacy fence, you should check your local municipality's building rules to ensure that you obtain all of the necessary permissions before you begin construction on your privacy fence.

Permits may add anywhere from $20 to $400 to the final cost of your project, so don't be surprised if you get a high permit charge. When budgeting for your privacy fence, find out if you'll need a permit and how much it will cost you in advance of when you'll need it.

Extra Services

When looking for a fence contractor, keep in mind that you may require additional services in addition to your privacy fence installation when making your decision.

Does your property have any landscape elements that might require removal, for example, in order to create room for your fence? It is preferable to employ a contractor who can take care of this for you rather than having to a) remove them on your own or b) contract with a whole other company to do so.

Here are some extra services that are frequently provided in conjunction with the installation of a new fence:

Trees, shrubs, and stumps are being removed.

If the barriers in your yard are very huge or are placed in a challenging location, you may not be able to remove them on your own unless you hire a professional. Hiring a professional to remove items such as trees, shrubs, and stumps may be rather expensive, and you don't want any unexpected expenditures to come as a surprise.

When designing your privacy fence, make a note of any landscape features that will be in the way. During your initial consultation with a fence contractor, inquire if they can remove the trees for you or if they can recommend a local tree service to do the work. The size and placement of the tree, shrub, or stump will determine how much the professional will charge.

Added costs range from $585 to $1,570 each tree, $125 to $225 every shrub, and $275 to $616 per stump, depending on size.

The installation of a new fence

Perhaps you'd want to replace an old, dilapidated privacy fence with a new one. In this case, your contractor may assist you as well, because most fence installers will remove the current fence and take it away for you.

Your contractor will charge you for fence removal depending on the number of linear feet of fence that has to be dug up, just as they do for fence construction (typically per the linear foot).

Depending on the sort of fence you need removed, the cost may be more or lower depending on the difficulty of removing the structure.

The additional expense is between $3 and $5 every linear foot of fence that must be removed.

Painting or staining the wood

If you pick a wood privacy fence, you may need to paint or stain it after it has been installed, depending on the type you use. Wooden fences, for example, require a protective coating to keep them free of rust, warping, vermin, and other natural annoyances, among other things.

Even if you pick a vinyl privacy fence that does not require sealing, you may wish to change the color of the fence to match the style of your house or garden.

You have two options when it comes to painting or staining your privacy fence. You may either hire the fence installer to do it for you, or you can purchase the paint, stain, brushes, tarps, and a ladder and complete the project on your own time and budget. It doesn't matter which route you go; you'll spend more for a bigger fence or higher-quality paint or stain.

Added costs range from $500 to $3,000 each year.

DIY Privacy Fence Installation: How Much Does It Cost?

Some privacy fences are less difficult to install than others, depending on their design. Vinyl fence panels, for example, are simple to install since they snap into place. Rolls of bamboo or bamboo fence panels, on the other hand, may be very simple to build and are more cheap.

The most common choice is a wood privacy fence, but it would require a bit more effort to prepare and install all of the different components of the fence.

In order to save money on your privacy fence installation, you should budget at least a few days to complete the task. You should consider enlisting the assistance of a buddy because having an extra set of hands may make the task simpler and, in some cases, may even be required for certain phases in the process.

Equipment is required.

There are several different types of privacy fences, and the installation method for each differs somewhat. As a result, you may require slightly different tools for each type of fence.

You'll need the following equipment to construct a typical wood privacy fence on your own property. All of the required equipment is quite basic, and you may already be in possession of the majority of the tools.

In case you don't, we've gathered average pricing data from Lowe's, Home Depot, and Amazon to assist you in calculating an estimate of how much you would spend if you had to purchase all of the equipment from the store from scratch.

Materials are expensive.

For a normal backyard, a privacy fence that is around 150 linear feet in length is generally sufficient. A wood fence of such size requires the following materials, which are listed below. Based on the average pricing from Home Depot and Lowe's, we've calculated how much of each material you'd need and how much it would cost you.

Keep in mind that depending on the type of wood you select, the final cost of your project might be either more or cheaper. Tropical hardwoods and redwood are often the most expensive types of timber, with pressure-treated pine being the most cheap.

The cost of DIY installation versus the cost of professional installation

In all, you can anticipate to spend around $5,566 on tools and supplies, as well as a few days of your work, to construct your own wood privacy fence.

If you use bamboo for your privacy fence, you will most likely spend less money on materials overall. If your privacy fence is constructed of vinyl, you may expect to spend a higher price.

It should be straightforward for an experienced home renovation DIYer to put up a privacy fence, but it does take a certain level of familiarity with power tools and light construction, which not every homeowner possesses.

It's possible to employ a professional fence installation if you don't believe you're up for the challenge. If you hired a professional to install and paint the same 150 linear foot wood privacy fence as opposed to building it yourself, you would cost roughly $7,900.

Making the repairs yourself would save you over $1,500, but it would take a significant amount of time and effort on your part as well. Decide which option is the most worthwhile for you and go down that road.

Cost of Privacy Fencing varies depending on location.

The pricing of vinyl and bamboo privacy fence materials are generally consistent across the country, but this is not the case with wood privacy fence materials. As a result of the fact that some types of wood are more prevalent in certain places than others, different types of timber will have varied pricing points based on where you reside.

It doesn't matter whatever style of privacy fence you pick; the exact rate of expert labor will be determined by the current market conditions in your area.

Privacy Fences: Frequently Asked Questions

1. What is the cheapest privacy fence that you can find?

If seclusion is vital to you, bamboo rolls or panels are the most cost-effective fence alternative. Even while there are less expensive fence materials available, such as hog wire and chain-link, they are see-through and so do not make effective privacy fences.

2. Is it less expensive to construct a fence horizontally or vertically?

Vertical wood fences are less expensive than horizontal wood fences, and they are also more sturdy and long-lasting in general.

3. Is it preferable to use screws or nails while building a fence?

Both of these ideas are valid alternatives. The cost of nails is typically less expensive, but screws tend to survive longer and are easier to remove in the event that you need to make repairs later on.

Conclusion

Many communities have privacy fences, and installing one in your backyard may transform it into a peaceful, isolated retreat.

Despite the fact that privacy fencing is not the most economical fence design, it is still reasonably priced, with a national average overall cost of around $6,375, which includes expert installation. It is possible that the price will range from $4,788 and $12,961 depending on whether you use budget-friendly or more quality materials.

Alternatively, you could roll up your sleeves and construct your own wood privacy fence for a total cost of around $5,566 in supplies and tools. Again, the use of various materials or the construction of a particularly large or tiny fence can have a major impact on how much that price is for you to pay.

To figure out what a fence will cost you, please use our fence price calculator!

Why Choose a Cedar Fence

Thu, 05 Jan 2023 20:30:41 GMT

Why is a Cedar Fence the Best Choice?

The topic of what sort of wood is ideal for wood fences is one of my favorite questions to be asked whether I'm talking to a customer or run across someone who has that perplexed expression on their face when shopping at a large box store. There are many different types of wood fences available, ranging from bamboo and spruce to yellow locust pine and fir, among others. All of them may be readily constructed in order to create an appropriate border for your home or business. Western red cedar fencing, on the other hand, is the greatest form of wood fence available on the market.

A Brief Overview of the History of Western Red Cedar

The Pacific Northwest area is home to the western red cedar tree. Its use in our nation dates back to Native Americans, who dubbed this wood the "Tree of Life" because of its healing properties. As a matter of fact, Native Americans not only utilized this wood to construct their houses, but they also used it to construct canoe, totem poles, masks, rope, and clothes.

One of the most amazing aspects of cedar is that it was the source of one of the oldest fragrances known to humans. The sticky oil extracted from the cedar tree was used for embalming by the ancient Egyptians. They also utilized the wood from the tree to build coffins, some of which are still on exhibit in museums today, thousands of years after they were built. Assuming you are familiar with your Bible studies, you may recall that Noah prepared an offering of cedar and myrtle incense to express his gratitude for having survived the legendary deluge. There is also evidence that Tibetan monasteries used cedar to burn as incense, according to historical records.

Demonstrating the Benefits of Western Red Cedar

Western red cedar is a high-quality grade of wood that can be more expensive than other types of wood. However, the benefits of using western red cedar outweigh the increased expense. Never believe a service representative at a big box retailer when they tell you that there aren't many distinctions between wood grades and that buying anything less costly will frequently suffice (Believe me, I hear this all the time in those stores!). That simply isn't the case. For example, in the case of wood fences, using lower grade wood implies that your materials may need to be replaced sooner than you anticipate—which means that you may wind up spending more time and money on repairs because you used inferior fencing materials.

The following are some of the reasons why cedar fences are the finest option for any home or business, as explained by us to all of our customers.

When it comes to durability, cedar fence is the best option.

Simply said, western red cedar is one of only two varieties of wood (the other being red wood) that is extremely sturdy and lasts far longer than the majority of other forms of wood fences. Its natural oils assist to make the wood more resistant to rot and insect attack, therefore improving its longevity and strength without the need for chemical treatments. Western red cedar is extremely stable to the point that it shrinks very little when used to construct a fence, ensuring that your fence remains straight and robust for the long haul. A cedar fence that has been in place for over a decade adjacent to a pressure-treated pine fence shows that the cedar fence has aged very beautifully. The oils in the wood also assist to keep the wood looking good. Because cedar fence is so durable and long-lasting, if you travel about specific sections of Frederick and western Maryland, you may come across one of the fences that our founder, Charlie Powers, built in the early 1980s.

When it comes to adaptability, cedar fence is the best choice.

One of the most advantageous characteristics of western red cedar is that it is devoid of pitch and resin. If you are a homeowner looking to enhance or prolong the life of your wood by applying a variety of beautiful finishes, from dark stains to lightly colored bleaches to semi-transparents, cedar is one of the best choices when it comes to accepting and maintaining an extensive range of beautiful finishes, particularly if you want to maintain the wood's natural beauty.

If you want to build a wood fence for a variety of reasons, including keeping your pets and loved ones safe within your yard or increasing your privacy so that you can enjoy your time outdoors without being bothered by your neighbors or the general public, you can use western red cedar to construct a variety of different types of wood fences.

Fences made of board on board
Fences around paddocks and estates
Fences with pickets
Fences for personal privacy
When it comes to being environmentally friendly, cedar fence is the best option.

Real wood fences are the only kind to consider when choosing your fence. There is nothing more pleasant to the senses than the natural fragrance of cedar fence planks, in my opinion. There's something about the scent of genuine cedar that immediately brings to mind thoughts of home, of our nation, and of childhood memories for many. And if being ecologically conscious is essential to you, there is nothing better than a cedar fence! In addition to removing greenhouse gases from the environment, western red cedar is a renewable and biodegradable resource. When you purchase cedar fence panels, you can almost always be assured that the material was sourced from a sustainable forest.

When it comes to aesthetics, cedar fence is the most attractive option.

In conclusion, cedar is an absolutely stunning wood that always appears to be in good condition due to its rich texture and bright hues. When it comes to natural elegance, cedar is hard to match when it comes to creating a lovely and lush look to surround your yard or your entire home. Visitors to our offices on Tilco Drive are always impressed by the quality of our cedar fence samples, which makes it simple to see why cedar fence is our most preferred fencing material.

Are you prepared to purchase a Western Red Cedar fence?

Please contact us immediately if you are ready to build the greatest wooden fence possible. One of our cedar-loving fence experts would be delighted to work with you to develop a western red cedar fence solution that fits your demands while also staying within your budget.

Top Tips for Choosing the Best Fence for Your Yard

ik@ippei.com (Tori Klein) — Sun, 01 Jan 2023 04:07:06 GMT

This is a subtitle for your new post

When planning to fence your yard, make an informed decision so that your option will meet the needs of your yard, family, and way of life, among other things.

Homeowners have a variety of fence alternatives to pick from, as well as a plethora of factors to consider before constructing a fence. Make certain that the fence you choose will satisfy the needs of your home: Is it your intention to keep children and pets contained, increase seclusion, or just increase the value of your home by improving the appearance of your yard?

Maintainability and pricing are also important considerations. You should also research neighborhood restrictions and choose the most qualified fencing contractor to do the installation.

When deciding between a white picket fence and a wooden privacy fence, Patrick Brouillette, proprietor of highly rated BuyaFence.com in Schaumburg, IL, advises that you should thoroughly analyze your options before making a financial commitment.

When it comes to the cost of a new fence, the average ranges from $4,600 to $12,000, depending on the size and type you choose. As a result, you want to make an informed decision the first time. The cost of fence installation is also affected by other factors, such as the slope of your yard.

When choosing the ideal fence for your home and family, highly rated fencing companies advise you to consider the following considerations:

1. Select the most appropriate fence for your yard.

Fences are installed by homeowners for a variety of reasons, including seclusion, aesthetics, and the protection of dogs and children. Fences, when done correctly, are one of the most important landscape components that can raise the value of a home.

Pickens recommends that you first ask yourself why you need a fence and then let the answer drive your decision-making. He recommends that you put your necessities first and your wants second, rather than the other way around.

If you want seclusion, but you need a picket fence, he says, adding that privacy fences are generally discouraged since they might detract from a home's value when it comes time to sell. 'When it comes time to sell your house, potential purchasers will wonder, 'What are they hiding back there?'" says the author.

In the case of a need for seclusion, wooden fences are typically the most effective solution, while vinyl fencing is occasionally a feasible alternative, according to Jennifer Pechanec, manager of Chesapeake Custom Builders in Chesapeake, Virginia.

However, she points out that certain vinyl fences may have panels that are too widely apart to give adequate privacy.

Customers who do not require seclusion might opt for an aluminum fence, which provides a classy, open appearance to their yard. Aluminum fencing is required by some homeowners groups in certain localities.

In terms of confinement, if you're primarily concerned with protecting a pet or a youngster, no one style of fence is particularly preferable to another, according to Michael Sterrett, owner of Affordable Fence in Bloomington, Indiana.

Always keep in mind that you are constructing a fence for containment purposes. When building a fence to keep a pet contained in your yard, for example, it is important to consider what your animal is capable of in terms of digging and jumping, explains Pickens.

“The last thing you want is to spend time and money building a new fence, just to have your dog jump over it when you let him out for the first time,” he explains.

2. Take into consideration fence upkeep.

Consider how much time you want to devote to keeping your fence in good condition.

Wooden fencing requires the most upkeep due to the fence painting and staining that must be done every couple of years, but it can increase the value of your home by making your yard more aesthetically beautiful, according to Pickens, who also recommends it.

Many homeowners prefer aluminum or vinyl fencing because it takes little maintenance over time, according to Sterrett. Aluminum and vinyl fencing are also less expensive than other types of fencing. Pickens points out that wood fences have the advantage of being more easily mended than metal fences.

It is possible to replace damaged boards and have them fit in with the rest of your fencing, according to him, if a storm causes damage to a few.

As Pickens warns, if you need to repair or replace part of a vinyl or aluminum fence, you may discover that the fence manufacturer is no longer in business or no longer sells the product, making it difficult to find fencing that matches what you already have in your yard, or that the fence manufacturer is no longer in business. According to him, clients may find themselves having to replace an entire fence despite only minor damage to a few portions.

According to Pickens, “the bottom truth is that if you construct a wood fence, it will always be easily repairable and replaceable.”

3. Consult with your homeowner's association.

It's possible that if your community is governed by a homeowner's association, you will have no say in the style of fence you can erect. Before proceeding with a project, make certain that the fence you desire satisfies the organization's requirements for materials and height.

In a related article, find out how much control homeowners associations have over your property.

Maintain adherence to community association policies and procedures at all times, or you may face legally enforced fines.

4. Select the most qualified fence contractor.

While it is possible to fence in a yard on your own, doing so will require specialized tools and a lot of hard work. Consider hiring a professional, but first check the company's licensing status and customer references to ensure that they are reputable.

Also, make certain that the fence contractor will obtain all of the building permits that you may require from your city or county government.

Your local planning and zoning agency can supply you with a plat map of your property, which will allow you to accurately delineate your property borders and better plan the location of the fence on your property.

5. Prepare a Budget

Nobody likes being surprised, especially when it comes to pricing on something you really want for your home. Do your research on building materials. Prices have exploded since last year due to inflation, be prepared for a drastically higher price than you originally anticipated. Cedar , and lumber for that matter, are not the most expensive fence material. Vinyl is. Vinyl continues to go through the roof, and is often in low supply. Take this into consideration when choosing your fence installation options.

A great way to budget for your next fence purchase is to use our fence price calculator . This will help you determine a starting point of material selection, number of gates, and if you can really afford the project or not. It's best to use this calculator prior to booking sales reps to come out, as it can be a waste of everyone's time if the budget is not available for the project from the get-go.

Have questions? Feel free to contact us directly at info@buyafence.com or by calling 855-469-7742

Selecting the Appropriate Fence Height for Your Residence

patrick@nationwideautomation.com — Fri, 25 Nov 2022 23:28:57 GMT

This is a subtitle for your new post

Selecting the Appropriate Fence Height for Your Residence

Residential fence heights range from approximately three feet tall to approximately eight feet tall, but there are a number of considerations to consider when determining the height of a fence for your home. To decide the optimal fence height for your property, you will need to examine the type and function of your fence, as well as the location of your home and any applicable local laws and regulations.

Determine the function of your fence

What is it that you want your fence to do for you? Do you wish to be protected from inquisitive neighbors? Do you wish to keep trespassers off of your property? You want to be able to keep your dog and children in your backyard, right? Do you want to make your swimming pool more secure?

Fence heights that are commonly encountered

By establishing the purpose of your fence, you may cut down your selection of fence height and material alternatives.

Decorative: These ornamental fences are typically used for their aesthetic appeal rather than for their protection. Fences that are decorative are typically three to four feet high, and they can be made out of wrought iron, vinyl panels, tubular bars, and other metals, among other materials.

Privacy: Available in a variety of materials such as wood, vinyl, and chain link, six-foot-high privacy fences are usually sufficient to keep your neighbors from peering into your windows and yard.

These picket or ornamental fences, which are commonly three feet high in front yards and six feet high in back yards, are often erected to a home in order to establish a clear border between your yard and a street or neighbor.

Dog : The most vital thing to ask is "How high can your dogs jump?" A four-foot dog fence is sufficient for the majority of dogs, but a six-foot dog fence may be required for larger breeds or jumpers who are taller than the fence.

Pool Fences: In the case of a pool, pool fences keep uninvited guests out while also protecting people and pets. The United States Consumer Product Safety Commission provides general standards on pool fencing (which should be at least four feet tall), but it is crucial to verify your local legislation to ensure that you are complying with the regulations.

Creating a garden fence between three and four feet in height allows you to show off your flowers or vegetables while keeping larger animals out. If you have a problem with smaller animals, consider installing a strong fence.

Check the laws and regulations in your area.

Fencing rules vary from county to county, city to city, and homeowner association to homeowner association. Fence height, color, material and position are generally governed by local ordinances. Before beginning your fencing project, it is critical that you are familiar with the applicable laws and regulations.

Join forces with Elgin Fence & BuyaFence.com for all of your residential fencing needs.

CMS can install and repair any fence kinds, and we can assist you in determining the height that is most appropriate for your needs. If you would like to make an appointment with one of our estimators, please call us at (855) 469-7742 or fill out our online contact form right now.

Tips for Choosing a Fence Company

Thu, 20 Oct 2022 23:34:22 GMT

This is a subtitle for your new post

Your home is a significant investment, and it is natural that you want to safeguard and enhance it. Installing a fence is an important step in security and a significant expenditure for a property owner. Choosing the appropriate fence contractor for the job is critical to avoiding issues at any stage during or after the installation.

There are seven fundamental techniques to protecting yourself, your property, and your investment.

Research

Before interviewing any fence contractor, you can learn a lot about the person or organization you're working with from your first meeting. Here are some things to be aware about:

When you phone the office, you should never get a generic response. Any professional company will have a professional phone answer that includes the company's name.

Any advertisement must have a genuine address. Many fly-by-night services do not have a legitimate address to which they can be traced.

Never be afraid to check Better Business Bureau listings. This is a free service designed to help consumers.

While it is natural for people who are looking at listings to choose the first company they come across. Keep in mind that being at the top of a search or phone list is not an indication of a company's ability.

Interview Red Flags

Some other considerations to bear in mind when you search for a contractor are as follows:

You should be wary of a contractor that requires you to make an immediate choice.

It is never a good indicator when a professional presses you to pay in cash. There are some respectable firms that will provide their consumers a cash discount, which should not be confused with the contractor who only accepts cash.

Any reputable contractor will provide you with a written estimate for the services you are requesting; if they do not, you should not do business with them.

Questions to Consider

Other items to discuss with your fence contractor or potential contractor include:

What materials do they suggest, and why?

Inquire about their methods if you are replacing or repairing your fencing.

What is the contractor's track record for staying inside the estimate amount?

How often do they complete their tasks on time?

Have they installed similar projects to yours?

Will any of the current materials be able to be utilized or recycled in the installation/repair?

Always consult with family members and obtain documented quotations.

Planning is as simple as 1-2-3.

1. When planning your fence, consider how much money you are willing to spend on materials and labor. Once you've made these decisions, you'll need to communicate them with the fence contractor and check that they'll be able to work within these parameters.

2. Determine the length of your fence. Will it include the entire property or only a piece of it? Do you want to incorporate different types of fencing, such as one near the house and another further away?

3. Look through magazines and other properties to get a sense of what you want, then show the photographs to the fence contractor to obtain a clear vision of what you want. Never be afraid to ask for design ideas or assistance.

Determine a Timeline and a Contact Person

As you go, you will require a firm timeframe for when the job is projected to be completed. Determine whether there will be any reductions for lateness or failure to meet the set goals.

Find out who the direct responsibility is in the event of any problems or queries on major jobs where numerous employees will be doing the work.

Guarantees

Some contractors will provide you a warranty on your job or materials. Inquire about any job-related warranties provided by the organization.

Depending on the materials you choose for your fencing, it may also come with a warranty. Many automatic gate manufacturers provide extended warranties of up to 7 years.

Payment

You'll need to find out what the company's policy is on work. Some businesses want full payment up front, while others require partial payment or payment at the conclusion of the job.

Will they provide funding? Do they take credit cards, and if so, which ones?

If you are interested in obtaining pricing information, please use our free online price estimator available here .

If you require financing, click here .

If you're ready to make a fence purchase, schedule an onsite visit with one of our sales representatives here .